Definitions and Bandwidth

Ethernet ¹ cables continue to evolve every few years to meet people’s data needs. There are several options available today. The one you choose should be based on your needs and the amount of bandwidth ² you require to transmit data.

The CAT6 wires can transmit roughly 400 MHz over 55 yards. The main advantage over previous cables is the reduced noise and crosstalk. CAT6A cables transmit up to 500 MHz, which is roughly twice the bandwidth ², or range of frequencies transmitted, of CAT6. CAT6A goes further in reducing noise and crosstalk, so there is less error in other devices on the same line. Both CAT6 and CAT6A are slightly larger than previous incarnations and may be difficult to attach without special modular connectors or adapters, which attach the thicker wires to your network.

CAT7 has an additional increase in bandwidth ² and a further reduction in noise and crosstalk. It is made for frequencies of up to 600 MHz and is specifically designed for high speeds. CAT7A operates at frequencies up to 1000 MHz and can transmit 40 gigabits up to 54 yards and 100 gigabits up to 16 yards. The main advantage of CAT7A is the ability to use multiple applications at one time with a single cable.

Most people find that CAT7 and CAT7A provide significantly more bandwidth ² than they need, therefore opting for CAT6 or CAT6A. However, as more homes add additional technologies and uses for their ethernet ¹ cables, such as closed-circuit security devices, smart home technology and automation, and personal servers, CAT7 or CAT7A may be more appropriate. For this reason, people who foresee an increase in their bandwidth ² use may opt for the faster cable, while those who infrequently update technology may find that CAT6 is sufficient.

Installation

To transmit more bandwidth, the wires become heavier and become more difficult and more costly to install. CAT6 costs about 50% more than CAT5, and CAT6A costs 50% more again. This is because the conductors are more tightly twisted and contain separators between the wires to help eliminate crosstalk and increase insulation. For this reason, the cables don’t always connect without modular connectors, and the wires themselves must be cut more slowly.

A CAT7 installation is not considered standard at this time, which means it can be more difficult to find an installer who is willing to do the job, and the costs increase again by a minimum of 50%. For example, if a CAT5 installation costs $1,000, CAT6 will cost $1,500, CAT6A will cost $2,250, and CAT7 will cost roughly $3,375. This is due in part to the increased cost of the cables. Because the installation is more difficult, many installers choose to only work with the heavier cables at a premium price.

Durability

CAT6 has an estimated life cycle of around 10 years before errors and degradation begin to occur. CAT7, however, has an estimated lifespan of around 15 years. This is due in part to the heavier copper used, as well as the greater amounts of insulation shielding it. This is why many people looking to future upgrades for their homes may want to consider CAT7, as they will be less likely to need rewiring before the bandwidth is maxed.

Compatibility

Both CAT6 and CAT7 are backwards compatible cables. This means that they will work with CAT4 and higher, so upgrading to either system does not mean needing to upgrade equipment as well.